Car Radio Supplies Cheapest Parts On the Web

Car Subwoofer Sub

Thanks for visiting our site!
Car Subwoofer Sub
Checkout Ebay Auctions For The Cheapest Prices

Check out Amazon:

Featured Article: Car Subwoofer Sub:

Adding a subwoofer to your system is in no way easy, especially if choosing to build a subwoofer enclosure. If you intend to build an enclosure, you will need some essential facts and information before you build it, otherwise something may go wrong, and you could end up wasting your materials.

Must Do 1: Find out what design and size is best for your subwoofer. The wrong design or size could affect the performance of the subwoofer in your car, making your system worse rather than better. The manual should tell you the free amount of air space between woofer and enclosure needed, whilst a simple equation where you find the EBO (efficiency bandwidth products) can help find the best type of design. Alternatively, the manual or a car audio expert may have suggestions on design.

Must Do 2: Decide upon how many enclosures you may need. Although it is not necessary to create two separate enclosures, it practically works better. A sub enclosure can also be separated down the middle in two, so that one sturdy box fits two subs in. If no divider is there though, and one subwoofer malfunctions, it will leave double the amount space needed for the other sub, which will affect the performance of your system. Separating the subs, whether by separate enclosures or a divider (known as twin enclosures), will prevent this from happening. If you have one sub alone, this makes the decision far easier as you will have only one enclosure to build.

Must Do 3: Think long and hard about the materials you are going to use in your enclosure. The enclosure is required to be a hard rigid structure, so that the subwoofer is safely in place and can do its job correctly. Without a rigid structure, the sub can easily be damaged and will not perform as it should. Therefore, the material used needs to be strong and firm, for example, wood, MDF, fibreboard, thick particle board or thick Plexiglas are all used regularly in enclosure structures. Another choice is mould the enclosure into a shape using fiberglass. However, this is time consuming due to the many layers needed.

Must Do 4: After thinking about the material, consider how you are going to make sure it is a fixed and firm structure? Adding braces and strengthening weak points, such as the corners will help keep together your structure. Complete a design on how you are going to strengthen your structure beforehand and remember that any reinforcement or brace will take up air space, which means you'll need to expand the interior space in the enclosure design in accordance with the space lost to the brace.

Must Do 5: When using nails and drills always be careful. You don't want to unnecessarily drill holes or break the structure via screws. The joints are a particular area, which can be easily damaged by screws. Avoid potential damage by distancing your screws out with equal spaces and drilling over half way prior to the screws being placed in, as this will stop the wood from breaking.

If you are interested in car subwoofers, as well as sub enclosures, visit www.bassjunkies.com the West Midlands based supplier of car audio systems.

Sub Woofer Systems For The Car

The sub woofer is one of the most powerful audio enhancement device that you can incorporate into your car’s sound system. This device can also be found embedded in home sound systems as well. The basic purpose of this device is to enhance the sound quality of your audio system by adding bass.

Most cars come equipped with a basic sound system which does not include the subwoofer and thus is incapable of reproducing bass frequencies to add to the listening experience. In general cars have small speakers that have the capacity to produce frequencies going as low as 40 HZ. This occurs when decibels cross the 100 mark.

However when you incorporate a state of the art cone sub woofer in your vehicle the capability to reproduce bass frequencies will enhance and you will be able to experience bass tones ranging between 20 to 200 HZ. This is an extremely high level where the vibration level matches the tone.

Sub woofers first came into use back in the 1970s. This was the first time the speakers were invented and were being incorporated into recording studios for musical recordings. Car subwoofers are embedded with a driver that can measure anywhere in between eight to thirty four inches. The ones you will be able to find at live events like theaters and concerts fall in between 15 to 18 inches. Subwoofers add excitement as they emit vibrations along with the sound.

If you want to enhance the sound quality of your auto audio system then you will nee to purchase car subwoofers from the aftermarket. These devices are generally installed in the back of the car. This helps to attain better sound quality as a nice balance is achieved between the placement of the stereo system and the car subwoofers.

Installing subwoofers into your car requires a little bit of technical expertise. In order to ensure the correct installation of your subwoofers you should get subwoofer enclosure prefab as well. The installation process commences with removing the carpet from the boot and then cleaning the area. Accumat or Dynamat should be applied to the trunk floor to act as sound deadening material. Following this you will need to make use of a roller that bonds the surfaces together prior to replacing the carpet. Next up you need to fit the subwoofer enclosure into the trunk.

You should know that your subwoofer needs to be fitted along with an amplifier. The amplifier comes along with an instructional manual. The car subwoofers need to be wired and connected with the rare speakers.

It is recommended that you do not fix your subwoofers permanently in the beginning. This will give you room to experiment with the positioning so as to be able to get the perfect balanced sound.

The make, model and size of car subwoofers and their compatibility varies. Hence you will need to be careful when it comes to selecting the right product for your car stereos system.

About the Author

Enhance the quality of your car’s audio system by incorporating car subwoofers through carstereos4u.co.uk/. This is your one stop shop for all kinds of audio and security needs for your car.

Hooking up a car subwoofer to my stereo reciever?

can I hook up a car sub by simply putting it in the red and black speaker terminals on the back of my reciever?

No you need to run it off of an amp. A head unit does not put out enough power for a sub. You could end up doing damage to your head unit. Check out Sparkyʻs page for complete info :

http://spkrbox1.spaces.live.com/

GM Enlists MECA SQ Judges to Test Chevy Cruze and Cadillac CTS Coupe Factory Audio Systems
Tuesday, August 17, 2010 -- In August, General Motors enlisted the help of MECA Commissioner Steve Stern and tenured Sound Quality Judges Vinny Taylor of Murfreesboro, Tenn. and Chris Zenner of Washington, Pa. to listen to the new sound systems in the 2011 Cadillac CTS Coupe and the 2010 Chevrolet Cruze, and to compare the Chevy Cruze's audio systm with other vehicles in its price range (under ...

Thanks for visiting!