Car Radio Supplies Cheapest Parts On the Web

Console Sub Radio

Thanks for visiting our site!
Console Sub Radio
Checkout Ebay Auctions For The Cheapest Prices

Check out Amazon:

Account limit of 2000 requests per hour exceeded.

Featured Article: Console Sub Radio:

OK, here's the deal: If you want to build a quality stereo system, SOUND DEADENING IS NOT OPTIONAL; IT IS MANDATORY.

Why is that?

Let me ask you a question: Do you want to hear music, or road noise? Do you want your license plate to be quiet, or rattle when the bass hits? Do you want to hear your tires, or do you want to hear MUSIC?

I know I want to hear the music, and as such, I never do a real car stereo installation without using sound deadening material.

So, with all of that said, let's take a closer look at sound deadening.

Sound deadening comes in many forms, but the two main types are spray on, and matting.

Spray on deadening comes in either an aerosol spray paint can or in a large bucket. The aerosol can is great for small jobs, but if you plan to go crazy with the deadening, you'll want to buy it in bulk. When you buy it in bulk, you'll also need a nozzle of some sort. Usually this can be purchased with the large bucket of sound deadening. This type of sound deadening material works best for tight areas, and where you want a medium amount of sound deadening.

The other kind of sound deadening comes in sheets and is applied with an adhesive on the back of the sheet. This deadening is more difficult to work with, but much more effective than the spray-on type. It is usually used on larger areas, or where more deadening is needed.

Because sound deadening can get expensive, the smart installer installs it where it is most effective. To figure this out, take a drive in your car with the radio off. Listen to where the most noise comes into the vehicle. The main places I look to deaden are around the wheel wells, the firewall (of course), the doors, the roof of the trunk, under the rear seats, and under the center console.

SO! Check out those places, check out any other place where noise comes through, and start figuring out how much material you'll need.

This rule should go without saying, but get more material than you think you'll need. The reason for this is because once you have the material installed, you'll want to do a second listening, only this time with the music turned on. You will most definitely find rattles that weren't noticed before. You will probably also find some places where you'll want to bulk up on sound deadening.

When reproducing music, noise and distortion are your biggest enemies. Sound deadening will go a long way towards fixing these problems.

In addition to silencing road noise, sound deadening works great for reducing rattles in your vehicle. For example: Say you just mounted some high powered speakers in your doors. Because vehicle manufacturers never intend for high powered speakers in the doors, they aren't designed to handle the vibrations.

To fix the vibrations (which sound HORRIBLE), just cut out a ring of sound deadening material, and apply it to the spot where you mount the speaker. Mount the speaker to the top of the sound deadening material, and be sure the speaker is bolted down tightly. Now, try turning up the stereo again. Did this fix the problem? If not, try applying another layer of sound damping material.

Another trick: Have you ever noticed that certain panels in your vehicle vibrate when certain bass frequencies play? Get some of the spray-on sound deadening material, and apply it to the back of the panel to dramatically decrease the vibrations. For larger panels, use sound deadening sheets.

Another trick: Does your license plate rattle when the bass hits? Don't look like an idiot, fix it! Take some sound deadening material, and apply it to the back of the license plate and the license plate frame. Try the bass again, only this time you won't embarass yourself when you drive through a parking lot!

Good luck and good sound!

-Honest AEB

Alan Bayer is an entrepreneur and car audio enthusiast. He runs an eBay store selling car stereo install supplies:

http://stores.ebay.com/honest-aebs-autosound/

He also has a GREAT website with car audio articles (such as the one from above). Also on the website, learn about car audio equipment, how to find the best equipment, how to install it, and save big bucks in the process!

[http://www.honestaebs-caraudio.com/]

Subscribe to Honest AEB's FREE Car Audio Magazine at:

[http://www.honestaebs-caraudio.com/magazine.html]

Auto audio questions and answers

1000rms Limit What Subs to use?
Since my last cross-question, iv realized its best to preserve the system under 1000rms, simply because i dont want to spend money on a spanking new alt. , etc... I have a inspection of subs but am wondering on which option to stir for. The most...

12' subs hermetic?
My neighbor gave me his old 12' subs and an amp, but he kept the box. I bought a box, but do I necessitate to seal the subs with the box? Or can I in recent times atach them with screws?

12 VDC Led Terminals?
I have a dual audio sub and it have led features. On the terminal it say that they will help yourself to 12 vdc only so what do i get to do to get my lights to work?

12" audiobahn flame series?
I got four 12" audiobahn flame series subs. Are these appropriate subs? I got a single hackney cab truck with bucket chairs and im gonna build a center console and ONly use 2 of em. What amp should i use for 2. here is...

12" JL Audio W7 vs RE AUDIO XXX 12"?
What has better nouns quality and more bass?

12" Kicker CVX box?
Right now I own it in a 1.3 cu ft hermetic box, but I want the sub to hit harder. What size ported box should I go near? What kind of port? I'm thinkin getting it tuned to 30-33 to protract some SQ.

12" kicker l7 2ohm soundstream amp?
will this amp be for for my 12 inch kicker l7 2ohm 7 # OUTPUT (watts):RMS (a) 4 Ohms 220x2 # RMS (a) 2 Ohms 380x2 # RMS (a) 4 Ohm Mono 760x1 # T.H.D.: 0.02% # FREQ. RESPONSE (Hz): 10 - 30k # SIGNAL TO...

12" Kicker L7 2ohm what amp?
i got 1 12" kicker l7 2ohm revision for christmas what amp will i need to power it. the sub is 750w rms can i use the kicker 750.1 amp near this sub? and if not can you moniker some good cheap amps to power...

12" kicker l7 2ohm? wich amp would be the best?
Have a 12" kicker L7 2ohm can only flex it to 4ohm and cant return the sub to get 4ohm magazine witch amp would be better sub is 750watts rms im thinking kicker Kicker 1500 WATTS PEAK OUTPUT!! 500 x 1 bridged RMS output (a)...

12" MB Quart PWE-304?
Are these good subs? I want to put two of them contained by my reg. cab dodge bump, I want really good nouns wuality but will they still pound? And should i have a hermetically sealed enclousure or a ported?

12" subwoofer storage area assistance? (Professionals please)?
I know next to nil when it comes to subwoofer enclosures. What would be the best bits and pieces to build one out of? I have two Sony Xplods model XS-L120P5W. What would be the best dimensions for the box and what would work better, ported...

12" type-x beside kicker zx1000 amp. how do i lead it to 2 ohms?
i think i wired it correctly but it doesnt hit as complex as it should and it distorts at higher volumes. its contained by a sealed box that i built to the exact specs from alpine. im using 8 assess power and groung wires. would thicker wire...

125vac SPDT rocker switch suitable for 12vdc applications?
It seems like nearby are such few DC SPDT switches out there, and a ton of AC SPDT switches. Most of the ac switches are rated 125ac, can I use this for a 12v dc switch surrounded by my automobile? The amp rating is quite low,...

12vDC cable: The white stripe indicates the + or - telecommunication?
Title says it all. I gotta splice a cigarrete lighter adapter cable from something onto something else, and minus a volt meter, how do i tell which of the two cables is the positive? One have a white stripe on it, the other doesn't,...

12w6v2 near a autotek 1000.1?
im getting one 12w6v2 and i have a autotek 1000.1 mono amp from a pass set up do you ponder that sub can handle that much power or should i turn my gain all the route down to prevent it from blowing??

15" sub and amp??!?
so i have a thunder bass injection and a bazooka 200 watt amplifier hooked up.. i know that ur not soppose to own a sub hooked up to a amp that has smaller amount wattage then the sub..but idk how frequent wattage the sub has...it is a...

15" Sub vs 2 12" subs?
Im about to bring back a system in my vehicle and I was trying to integer out whether I should get 2 12" subs or 1 15". I would distribute either system a total of 1500 watts rms. The saloon is a 2000 impala. I listen...

15" Subwoofer facilitate?
Ok, I want to run a Hifonics BXi 1606D to power one Fi 15" Bl which is Dual 1 Ohm, and I need to know a few things 1. What options/ upgrades should i achieve on the sub? 2. Would I need to upgrade...

150 watts plenty for a single JL 12 w3v2?
Is 150 watts RMS enough for a single JL Audio 12w3v2 in a hermetic enclosure ?

18" DD9500's vs. 18" RE XXX's?
Any tips or advice on any of these subs would help me out. It's so easier said than done to chose!

1986 Thuderbird beside the Premium Sound System, no nouns?
I have a 1986 Thunderbird Turbo Coupe with the Premium Sound System and want to instal an aftermarket, am/fm/cd and bought the plug so I dont hold to rewire everything, and hooked it up and got no sound out, have power but no sound, any ideas...

1989 Saab 900 Sedan cable routing?
I have a 1989 Saab 900s four door sedan with a clarion 1 din removable stereo (factory installed) right in a minute. I would like to pick up a new addressee and install kit from crutchfield.com as many of my local shops close to Best Buy...

1990 Grand Am SE next to a 4 speaker nouns system what is a cheap but power full stereo system I could achieve?
Like I said 1996 Grand Am SE with a 4 speaker nouns system (the speakers and stereo are stock at the moment). My budget is up to $200. I listen to a lot of release metal and extreme metal so I'd like to catch one that...

1990 Honda Accord radio examine. Any special things I should know until that time trying to put a tentative radio within ?
I heard there are special codes and so forth. I simply want to buy a cd player radio and put it in. The old radio have too much static on AM and FM and the antenae seems to be OK.

1990 honda concurrence audio examine?
would new speakers surrounded by the rear be better than the stock ones? why dont my front speakers work? i only put in a director unit but when i turn it up everything sounds similar to crap. any advice?

1990 mustang GT front speakers, will 4's fit within crash?
I know the factory dash speakers are 3.5' inches but I already own a set of JBL 4' speakers I took out of another project, I haven't taken anything apart yet or tried to dremel anything, needed to see if anyone else had already done this and...

1991 toyota corolla, give support to on putting within unusual cd player!!!?
Im having trouble trying to figure out how my tapeplayer comes out so i can achieve my new cd player in. Is nearby an easier way other then taking the full top of the dash off? Step by step rather guys...Thanks!!

1992 BMW 325i aftermarket radio electric wiring issues?
I just get a 1992 325i and figured installing my cd player would be no different than yesteryear 5 cars I've had... I be wrong.. I cut the wires and got the refusal and positive wires spliced (so it turns on now when you start the car)...

1992 mercury sable stereo premium nouns system?
I need to find out the color codes of wires from the stereo to the amp surrounded by the trunk. I also need to know how to reset the keyless entry code and lock within a new one.

1993 chevy lumina stereo installation assist?
I got a latest stereo for my car. Got the harness but none of speakers or the amp work, but the radio comes on. Is in attendance any way to procure all my speakers to work by adjectives the factory harness. If so does anyone no the...

More Auto audio questions please visit : YesImAuto.com

About the Author

YesImAuto.com

How to install subwoofer/amp to stock wrangler radio?

I'm interested in installing a sub/amp, but I want to keep my stock radio. Does anybody have a how-to or expirence? Here is some specs.

2005 Jeep Wrangler X
Factory indash 6-disc changer
Factory 7-speaker includes sub in center console but it is blown.
regular pioneer amp and sub. I have had for years.

Thanks!!!

Been there done it, but by trial and error. It was years ago, the issue was with the wire for the stock sub and stock amp. Didn't sound that good so I just go a new head unit and re wired it.

Mafia - Walkthrough
Mafia (PC) Mafia The City of Lost Heaven

Thanks for visiting!